|
Toxic Mold
Test
|
Google Checkout.
You can pay for Entire Building Mold Testing Service $149 online card by clicking on the Google checkout button below.
►Entire Building Mold Testing Service INCLUDING Mold Species
Identification $224 for each group of 10 lift tape samples you
submit to the mold laboratory for mold verification and quantification, plus
mold species identification.
Online American
Express Card Payment.
You can pay for Entire Building Mold Testing Service $149 online with your AMEX card by clicking on the checkout button below.
Google Checkout.
You can pay for Entire Building Mold Testing Service $149 online card by clicking on the Google checkout button below.
Upon receipt of your credit card payment, the detailed lift tape sampling
instructions and the Mold Testing Log will be mailed to the email address
you provide when paying via credit card. If you want the instructions and
log to be emailed to a different email address than you used for payment,
please email that separate email address to the
lab.
If you wish to pay by business or personal check
or money order, please
email the lab to request that the detailed lift tape sampling
instructions and the Mold Testing Log be emailed to you for your use.
You would then mail your check or money order with the collected mold
samples and Mold Testing Log.
on and mold quantification of
the actual number of mold spores/colonies counted in each collected mold
sample, plus the projected/estimated mold spore/colony counts for each
entire room or area tested.
Each lift tape mold sample location procedure only takes a few
minutes, whether you take the sample immediately (sort of like a “camera
snapshot picture”) of existing mold contamination as of the moment of
testing, or whether you utilize the more comprehensive and special 24 hour
test duration per location mold testing protocol that was developed and
perfected by mold expert Phillip Fry. Most alternative mold testing (such as
air sampling) only captures mold spores that are deposited/landed in the
mold testing device/media in a very short time duration such as 5 to 15
minutes. Because workplace or home occupants breathe in airborne mold spores
for long durations (such as during the workday at one’s place of employment
or business) or while living and sleeping in one’s home, condo, or
apartment, Fry’s special 24 hour test duration mold testing protocol
provides a much more realistic insight into the true mold dangers that might
be existent in your workplace or residence wherein you don’t just stay for 5
to 15 minutes.
If you want to test more than 10 locations, simply order more than one
Entire Building Mold Testing Service when you place your order
below. Testing 10 or more rooms, areas, and heating/cooling duct registers
produces the most thorough, accurate, and comprehensive mold testing to
learn the true extent of possible mold infestation in your home or other
building.
Most professional mold inspectors prefer to mold test at least 15 to 50
different locations (at $75 to $125 per test conducted, plus a home or
building inspection fee of hundreds of dollars!) in a home or other
building---provided that the client can afford to do so. You can enjoy the
same comprehensive mold insight into your home or building for far less
money by your utilizing the
Entire
Building Mold Testing Service.
How? By following the detailed, in depth, easy-to-use instructions emailed
to you when you order the Entire Building Mold Testing Service,
you can:
► use the “lift tape sampling” mold test technique instructions (emailed to
you) with one inch wide by three inch long, clear “Scotch” brand or similar
sticky tape to collect mold samples at ten different locations in your home,
condo, apartment, office, or commercial building, including one or more
heating/cooling duct registers, plus an outdoor mold control test location.
Record the details of each mold sampling test location on the Lift Tape
Sampling Chain of Custody
Form, which you can print out now from this website, or use the copy emailed
to you when you place your order.
►measure the width and length of each room or other indoor area that you
mold test, and then record each tested room/area’s measurements on the
emailed Chain of Custody that you use to record the location of each
of your collected lift tape mold samples.
►mail the collected mold samples, along with your
Chain of Custody,
to the Professional Certification Institute (P.C.I.) Mold Laboratory USA
private post office box address for mail forwarding to the Philippines, or
directly (via air mail or post office global priority mail) to the P.C.I.
Philippines Mold Laboratory. The lab is able to do the mold laboratory mold
verification and quantification far more affordably than anywhere elsewhere
because of the far lower cost of operating a mold laboratory in the
Philippines. Please allow at least three to four weeks for the total
time it takes for mail delivery of your lift tape samples to the
Philippines, mold culture growth of each sample in a Petri dish (takes 7
days), and mold laboratory services that include a written report (with the
following lab results) that is both emailed and mailed to you---
●Mold verification: whether or not each of the lift tape
samples you have submitted contains mold spores/colonies.
●Mold quantification: for each sample containing mold
spores/colonies, how many different types of mold spores/colonies, plus the
number of mold spores/colonies for each different type of mold spore. If you
would also like to know the precise mold species of each discovered mold
spore/colony, please also order the Mold Species Identification
service below (US$75 additional lab analysis fee to do mold species
identification for a total of 10 lift tape samples).
●Total mold spores/colonies projected/estimated for each entire
room or area of each collected mold sample. This is calculated by the
mold lab from the mold spore/colony counts of each sample and the room/area
measurements you have submitted on your
Chain of Custody.
If you are paying by credit card,
buy now your choice of one of these Mold Laboratory professional services:
►Entire Building Mold Testing Service $149 for each group of
10 lift tape samples you submit to the mold laboratory for mold verification
and mold quantification.
Online American
Express Card Payment.
You can pay for Entire Building Mold Testing Service $149 online with your AMEX card by clicking on the checkout button below.
Google Checkout.
You can pay for Entire Building Mold Testing Service $149 online card by clicking on the Google checkout button below.
►Entire Building Mold Testing Service INCLUDING Mold Species
Identification $224 for each group of 10 lift tape samples you
submit to the mold laboratory for mold verification and quantification, plus
mold species identification.
Online American
Express Card Payment.
You can pay for Entire Building Mold Testing Service $149 online with your AMEX card by clicking on the checkout button below.
Google Checkout.
You can pay for Entire Building Mold Testing Service $149 online card by clicking on the Google checkout button below.
Upon receipt of your credit card payment, the detailed lift tape sampling
instructions and the Mold Testing Log will be mailed to the email address
you provide when paying via credit card. If you want the instructions and
log to be emailed to a different email address than you used for payment,
please email that separate email address to the
lab.
If you wish to pay by business or personal check
or money order, please
email the lab to request that the detailed lift tape sampling
instructions and the Mold Testing Log be emailed to you for your use.
You would then mail your check or money order with the collected mold
samples and Mold Testing Log.
Be trained and certified as a
Certified Mold
Inspector,
Certified Mold Remediator,
and/or
Certified Environmental Hygienist.
Solve Your Home Mold Problems for $99
anywhere in the world with the UNLIMITED (60
days) expert email guidance, direction, and assistance of Phillip Fry,
Certified Mold Inspector, Certified Environmental Inspector, Certified Mold
Remediator, and Certified Environmental Hygienist!
Mold Library Combination
Read the 5 mold
advice ebooks in the
Mold Library Combination, for a combined discount price of only
$49.00 [$75.00 if bought separately].
Combo package includes: (a)
Do-It-Best-Yourself Mold Prevention, Inspection, Testing, and Remediation,
$15; (b)
Mold Health Guide, $15; (c)
Mold Legal Guide, $15; (d)
Mold Home Remedy Recipes, $15; and (e)
Mold Monsters, $15. All helpful ebooks are delivered to your designated
email address by email attachments only within 12-24 hours of your order.
Order Now!